Single Coil Flexible Clip Around Current Transducers

Based ROGOWSKI Principal CWT wide-bandwidth Hz to MHz CWT Wide Bandwidth
 

CWT Wide Bandwidth

Peak Currents form 30A to 600KA * Typical Bandwidth form 0.1Hz – 16 MHz Robust , Flexible Clip Around Coils * Standard Lengths 300, 500, 700 & 1000mm Insulation 10 KV pk * Custom Lengths upto 5 M * Battery & External DC Supply Coil Thickness 8.5mm * CE Marked"
 

CWT Mini

Peak Current form 30A to 600KA * Typical Bandwidth form 1Hz – 17 MHz
Thin, Flexible, Clip-Around Coils * Standard Lengths 100 & 200mm Coil Thickness Either 3.5 or 4.5mm * Insulation Either 2 or 5KV PK Battery & External DC Power Supply * CE Marked"

CWT LF

Measuring AC Currents form 1A – 300,000A * Typical Bandwidths form 0.1 Hz to 6 MHz Very Low “DROOP” Values During Long Pulses of Currents * Highly Effective in Small Currents at 50-60Hz * Sinusoidal Currents with Significantly Lower Phase Shifts Instantaneous + 6V pK O/P to Plug Directly into Scope / DAQ / DVM / Power Recorder Easy to Insert Probe in Confined Places * Non Intrusive * CE Marked
 

CWT Ultra Mini

Fits Between the Legs of TO220 Semi Conductor Device Peak Currents form 30A to 1.2 KA * High Frequency Bandwidth – 20MHz Across the Range Thinnest, Flexible, Clip-Around Coil - Measures only 1.8mm * Coil Length 80mm Insulation 1.2 KV pK * Battery & External DC Power Supply Operation * CE Marked"
 

LFR

Peak Currents form 60A to 60 KA * Dual Sensitivity – Set to give 10mV/ for + 600A pK & 1m/A for + 6000A pK – Switch Selectable * Typical bandwidth 0.1Hz – 1MHz * CE Marked Robust. Flexible, Clip-Around Coils * Standard Lengths 300, 500, 700, 1000mm Custom Lengths up to 5 M * Coil Thickness 8.5mm * Insulation 2 KV pK Battery & external DC Power Supply Operation * Very Low Noise Floor
 

RCT and IRF–clip-around, ac current transducers

RCTi

Compact, Light Weight, DIN Rail Mountable Electronics Enclosure Powered by External DC Frequency Bandwidth form 0.6 Hz to 1 MHz * Typical Accuracy 1%Supplied with Traceable Calibration * Predictable Phase Error < 1 DEG at 50 Hz and Higher Frequency * Switch Selectable Dual Current Range in a Single Package
 

RCTi 3 phase

Rated current ( rms) 500A to 50,000A , Rated Output ±5.0 Vrms ( ± 7.07 V peak) , Output limit 150% FS ( ±10.6V peak) , Supply Voltage 12 / 24 Vdc, Bandwith (-3dB) 0.6Hz to 800kHz, Output load > 10.0kΩ
 

IRF AC current transducer in IP65 transducer

Rated current ( rms) 500A to 50,000A , Rated Output ±5.0 Vrms ( ± 7.07 V peak) , Output limit 150% FS ( ±10.6V peak) , Supply Voltage 12 / 24 Vdc, Bandwith (-3dB) 0.6Hz to 1 MHz, Output load > 1.0kΩ
 

DC Flex Transducers

* Suitable for DC Currents of 2KA & above
* Single Shot Measurement with 1% Acc.
* Intrinsically Safe – Galvanically Isolated
* Battery Powered with Integral Display
* No Need For External Meter / Scope"