MV 100 / MV 200

Mobile Corder

Network-compatible Data Logger with Color Monitor

MV100 / MV200 

*    MV100 ( 12 channels max. ) and MV 200 ( 30 channels 
     max. ) added to data logger line-up
*    5.5 inch ( MV100) / 10.4 inch  ( MV 200), wide
     viewing-angle,  TFT  color LCD for better view ability.
*    Removable storage on  3.5-inch floppy disk, Zip disk, 
     or PCMCIA ATA flash memory card.
*    Data collection over Ethernet network ( standard )
*    Network-compatible sophisticated software
*    Highly reliable hardware.

                                    MT 120 / MT 110

MT120     :   Ideal for field calibration of pressure /
                   differential pressure transmitters of accuracy + 0.1 %
                   - No other equipment needed for 24 V DC
                   power supply and measuring the output 
                   signal

MT110     :   Precise, simple-operation manometer offering liquid
                   pressure  measurement.

                                    FEATURES

*     High accuracy pressure measurement + 0.02% of reading 
      (Models 265202 and 265232, 25-130 kPa, at 23 + 3 ^O C )
*     Measures both gases and liquids. Gases or liquids that are 
      not  inflammable, explosive, toxic, or corrosive can be measured
      by the same instrument.
*     Maximum  input up to 500 kPa  ( for 10 kPa and 130 kPa  range
      models ) - greatly improved  sensor protection against excessive
      accidental input pressure.
*     Three types of power supply 
        
       >   100-120 V AC/200-240 V AC
       >   12 V DC
       >   External battery pack ( optional accessory )

      Ni-Cd battery provides up to approx.  six hours continuous use;
      battery  charger is supplied.
*     GPIB or RS 232-C interface ( selectable )
      Either the GPIB or Rs-232-C interface can be selected.
*     The pressure display unit can display kPa, kgf/cm ^2, mmH₂O,
      mmHg, psi, in H₂O, and inHg ( switchable )       

MT 120 only

     The  MT 120 incorporates special functions for field calibration of 
     pressure / differential transmitters.

*       DMM function  ( built - in DC measurement of 1-5 V and 
        4-20 mA DC signals, floating input. )
        Measurement accuracy : + ( 0.01% of reading + 2 digits ) 
        at 23 +3 ^O C.
*       24 V DC power supply to transmitter ( floating output )
*       % value and % error display  functions.  These increase the
        efficiency of calibration and inspection of pressure / differential
        pressure transmitters.
*       Measured data memory Up to 1024 field calibration data items 
        can be stored in internal memory.

MT 120 / MT 110

DX 100 / DX 200

 
DX 200 / DX 100

*   Standard - equipped with 10 BASE - T Ethernet
    connector.
*   Use of high resolution, wide angle TFT color liquid crystal
    displays for unparalleled ease of viewing.
*   In addition to 3.5" floppy disks, ATA  flash memory ends
    ( upto 160 MB ) & ZIP disks  ( 100 MB ) can be used as
    removable storage media.
*   The front panel of the DX series complies  with the IEC
    529-IP65 standard to keep out dust, grit & water spray.
*   The PC application  software  provided by YOKOGAWA
    seamlessly  integrates DX series recorders with a
    network. 

 
OR 100 / OR 300

*         4 channel 500  V rms direct  input  in a slim &  light body.
*         Fax / Modem by a PC card.
*         Powerful  trigger functions.
*         Four - mode power supply 
*         Flash ATA memory card, RS  232 communication,
*         400 kS/s, 11 bits effective A/O resolution.
*         Harmonic  Analysis ( OR 300 ) 

OR 100 / OR 300