Non Contact Infrared
Temperature Products

SNAKES EYE ^TM 

Infrared Thermal Inspection for Hot Melt Adhesive

IRt/c.01 IRTC

Based on the IRt/c.01 family of models, the IRt/c.01HH-K-RF is an accurate but inexpensive infrared probe designed to be used with all common type K thermocouple meters.
Food Temperature Range 0 to 80°F (-18 to 27°C)
Field-of-View 1:1 approximately
Speed of Response 0.1 second approx.
Construction ABS plastic housing and handle, hermetically
sealed, immersible for cleaning.
Cable 30 in. (0.76 m) type K with molded plug connector"
 

NEW IRt\c 01

Sensing Range               -50 to 550 °F (-45 to 290 °C)
Ambient Temperature    0 to 160 °F (-18 to 70 °C) ,
Field-of-View                    1:1 (60°) approximately  
Minimum Spot Size         0.3” (8 mm)

Now you can have 100% inspection of hot melt adhesive to your product . . . not only its presence, but its position as well. Employing new state-of-the-art infrared techniques (patent pending), the SnakeEye provides photocell simplicity of operation, with extraordinary thermal sensitivity to “see” each and every bead as it is applied in real time.
 

Handheld IR Scanners D-Series

The D-Series is an entirely different type of instrument than conventional temperature measuring devices. Designed specifically for the highest possible accuracy, it is the only infrared instrument which can be certified as to NIST -tracable accuracy on real surfaces of unknown emissive, while completely free of contact errors and heat sinking errors of contact devices.
 

Transmitter

The t/c.XMTR is specifically designed to interface any model IRt/c by a simple thermocouple connector or splice. The two wire current loop can be used in any conventional 4-20mA, 0-5V or 0-10V circuit that is scaled for the temperature range of interest.
 

Infrared Probe

IRt/c.01HH-K-RF Infrared Probe For Refrigerated Foods Temperature Inspection"

Based on the IRt/c.01 family of models, the IRt/c.01HH-K-RF is an accurate but inexpensive infrared probe designed to be used with all common type K thermocouple meters.
Food Temperature Range 0 to 80°F (-18 to 27°C)
Field-of-View 1:1 approximately
Speed of Response 0.1 second approx.
Construction ABS plastic housing and handle, hermetically
sealed, immersible for cleaning.
Cable 30 in. (0.76 m) type K with molded plug connector"

IRt/c.01HH Infrared Probe Plugs Into Any Portable Thermocouple Meter for Low Cost
Non-contact Hand-held Temperature Inspection System "
 

Based on the IRt/c.01 family of models, the IRt/c.01HH is an accurate but inexpensive infrared be designed to be used with all common type K thermocouple meters. It provides the user with the following advantages over contact probes:

| Precalibrated IR sensors | IR Sensors | Medical Purpose Model |  Adjustable IR Temperature sensors |
| Thermal Switch | Micro Infrared Sensors